After pressing
the RST button, the program gets stuck before the start or it looped all the
time in the attempt to start.
The whole
misconduct usually happens when you connect a working ESP32 DevBoard to the
GPIO0.
Before,
everything works without any problems, but nothing goes after that. It's like
bewitched.
ESP32 NodeMCU
DevBoard ESP32 Dev Kit WROOM32
4 ESP32 boards
all with the same error after using GPIO0 G0
COM3
Monitor Feedback
message after pushing the RST button next to the small USB at the ESP32 nodeMCU
DevBoard
ets
Jun 8 2016 00:22:57
rst:0x1
(POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip:
0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO,
clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail
12 room 4
load:0x40078000,len:9720
ho 0 tail
12 room 4
load:0x40080400,len:6352
entry
0x400806b8
|
Nothing else
Or it loops
endless trying to start the program after pushing the RST Button